Overview
Rubber Stone™ Play Surfaces are high-caliber systems designed to deliver superior performance under the most demanding circumstances. In order to extend the life of your system, reasonable care and maintenance must be provided. Standard required procedures are as follows:
Cleaning
- Avoid using a broom.
- For occasional cleaning, use a blower or water hose.
- Cleaners must have a neutral pH and be approved for use.
- Once a year, pressure wash the surface using 2000–4000 PSI.
- DO NOT exceed 4,000 PSI. Maintain a distance of 6” or more from the surface.
- Use only potable, mineral-free water.
- Wipe up all spills immediately.
Equipment
- Lift or carry equipment—never drag it across the surface.
- Use crossing mats to protect the surface when moving equipment.
Foot Traffic
- Do not allow spiked shoes or other sharp objects on the play surface.
Vehicular Traffic
- Only allow lightweight mowers and maintenance equipment.
- Mowers must be operated at maximum height.
- Use plywood paths for equipment crossing.
- Inspect vehicles for leaks before entering the area.
- Avoid spilling oil, fuel, or other fluids.
- Do not turn steering wheel while stationary.
- Avoid lurching starts and hard braking.
Vegetation
- Avoid contact with chemicals like herbicides and fertilizers—rinse any accidental contact immediately.
- Maintain a 6” vegetation-free zone around the play surface at all times.
- Water-soluble herbicides (e.g., glyphosate) may be used—do not spray the play surface.
- Do not use weed eaters near the play surface.
Insects
- Use a powder insecticide if infestations occur.
- Consult Rubber Stone™ for product approval.
Other Guidelines
- No pets or wheeled vehicles (e.g., bikes, strollers) on the surface.
- Do not store equipment or heavy items on the play surface.
- Distribute the weight of heavy loads as evenly as possible.
- Protect the surface from heat—rubber softens in extreme temperatures.
- Misting with water on hot days is recommended.
Limited Warranty Notice
This information is based on E.W. Industries Ltd’s present knowledge and experience. E.W. Industries Ltd. assumes no liability for such information and advice. E.W. INDUSTRIES LTD WILL NOT BE RESPONSIBLE FOR CONSEQUENTIAL, INDIRECT, OR INCIDENTAL DAMAGES (INCLUDING LOSS OF PROFITS) OF ANY KIND. E.W. Industries Ltd. reserves the right to make any changes as required.
